Baby Shower and Planter Favors

BABY SHOWER! I threw one recently for one of my best friends, but there's a bit of a catch . . . she had the baby already! Due mostly to poor planning on my part, I scheduled a surprise baby shower for the day after my bestie went into labor. I decided that she probably wouldn't be super-keen on leaving the hospital early to eat cupcakes at my apartment, so I rescheduled for a few weeks down the road. 

BUT, her friends and family and I prevailed and we celebrated a few weeks late - no biggie!

I totally loved this diaper cake (could not find white diapers anywhere), but I think I startled my friends and family when they would walk in and see boxes of diapers around my apartment. . . 

The favors for the guests were these super-cute little herb planters. And I made 'em myself! And due to the fact that the party was delayed 6 weeks, they had really grown a lot!

No tutorial needed on this: Spray paint terra cotta pots with that blackboard paint. Plant your herbs. Write the name of the herb on the pot with chalk. Wait six weeks. Tie a bow around the pot, and tie on a little piece of chalk. Give 'em away!

Ummm. . . I love him!!!!!!! ARGH, so cute!!!!!!

(OK, I'm done.)

Happy Stitching!

Kelly

Clamshell Pile Pillow Tutorial

Clamshell Pile Pillow Tutorial

You asked for it, you got it—Enjoy!

Well, I started here, and wound up, well, with an actual pillow! With that said, let the tutorialing begin!

 1: Choose your fabrics: You'll need 3 solid gradation colors (I used 3 teals), and a variety of coordinating prints. This was a fabric challenge, so I used the prints I was given from Jay McCarroll's "Habit" line of fabric. Bee-you-teeful.

2. Cut a 14"-long strip from each of the 3 gradated fabrics. The widths can vary based on what you have lying around and which fabric you like the most; just make sure that once they are  sewn together the block will be 14" across (or can be cut down to 14"). Sew the strips together and cut down to a 14" square. Sweet.

3. Cut out a clamshell template from template plastic or cardboard. It's easy to draw: Make a right angle; each leg of the angle should measure 2.5" long. Then connect the two ends of the angle with a curve. Cut it out on the lines.

4.  Dudes, seriously, spray starch is the best. I recommend Best Press, or a brand that is specifically for quilting. You don't have to wash this stuff out, and it won't attract bugs. Spray starch and press your prints really well. They should be crispy.

5.  Trace the clamshell template onto the back of each print four times and cut on the lines. After you cut out the shape, fuse a small piece of double-sided fusible web into the center of each. You don't need to fuse the whole thing unless you really want to. Go ahead and remove the paper backing before you start arranging them. Trust me.

6. You will need about 24 clamshells. Arrange them, overlapping one row onto the next, working from the center to the corner. Then, put your big ole' iron on 'em and fuse 'em in place. 

(Hint: I'd highly recommend laying this all out to start with on your ironing board so you don't have to transfer this big pile of loose fabric after you've gotten it the way you want. I learned this the hard way.)

7. Place a slightly larger piece of batting underneath the fused top. Now, quilt it! Be sure to stitch through each shell a few times. They'll fray around the edges, but that's cool. Right? Anthropology-esque.

8. Trim the pillow top down to 13.5" square.

 9. For the backing, cut a 13.5" x 16.5" rectangle.

10. Fold under one short edge to conceal the raw edge. Topstitch the hemmed edge in place. Then fold the same edge down again (wrong sides together) until the rectangle is only 9.5" tall. Topstitch that newly folded edge, too.

11. Cut a second rectangle that measures 13.5" x 9". Fold one short end under twice about 1/4" each time to create a narrow hem. Topstitch this edge in place.

12. Place the narrow-hemmed rectangle right sides together with the pillow top, aligning the top edge of the pillow with the short raw edge of the rectangle.

13. Place the wide-hemmed rectangle on top of the pillow top and the narrow backing piece, aligning the bottom of the pillow with the backing rectangle's raw edge.

14. Pin all around the edges, and then stitch around all four sides using 1/2" seam. No need to leave a turning hole. Backstitch at the corners and where the backing sections overlap.

15. Clip the corners as shown, being careful not to cut the stitches.

16. Turn the pillow through the opening in the back, stuff with a 14" pillow form, and you're done! Loverly!!!!

Happy Stitching!

Kelly

Quilted Idea Keeper Tutorial

I've been wanting a little notepad to keep in my purse so that I can jot down project ideas when I have them, and to keep fabric swatches in case I should . . . happen to find myself in a fabric store with a buck to spend! Here's a little photo tutorial about how I made mine. You can make it as big or as small as you'd like - just make it small enough to fit in your purse!

If you make one, I'd love to see photos!

 I started with this sketch. You could really start with any simple shape

Took a few notes and made a few sketches of how i thought I could make the thing!

Sketch and cut out your template from heavy cardstock or template plastic. 

You can see mine's about 4" tall.

To start, you'll need 4 pieces of fabric (2 contrasting colors) and 2 pieces of heavy interfacing, each slightly larger 

than your shape template, and 2 lengths of ribbon, each about 7" long.

Sandwich a piece of interfacing between 2 contrasting pieces of fabric, wrong sides together.

Starting in the middle of the sandwich, quilt the sandwich together. I just did very tight, 

parallel stitching back and forth, but you could do any design you like.

See?

Cut any interior details out of your template.

Trace these interior elements on the wrong side of the fabric piece 

you want to be the front cover of your book. Cut them out.

Place a scrap of the contrast fabric behind the cutouts, and 

embellish as you'd like. I put my initials in it. Then layer/pin the fabric 

sandwich the same way you did before, trapping the scrap in between the 

top piece of fabric and the interfacing. Quilt.

Place the main shape template on top of both quilted rectangles. 

Cut out the shape from both. Topstitch around the outside edge of both. 

Tuck under one end of each ribbon, and topstitch one to the outside 

edge of both the front and back covers.

Use your template to cut out the interior book pages: 4 pieces of batting, 

and about 10 sheets of cardstock and 15 sheets of graph paper. 

Or anything else you want!

Layer the top cover of the book over top of the graph paper 

and cardstock. I held mine all together with a binder clip.

Sew along the left edge through the front cover and the paper layers. 

You'll have to use your handcrank to do this, but you can do it!

This is what the bottom of the stack will look like after sewing. 

Mine's messy. Whatever. No one will ever see it!

Layer the back cover with the batting, and stitch 

along the right edge. This should be easier to sew.

Now put the book together and clip together with a binder clip.

Using a pretty heavy-duty hand sewing needle and a double-thickness of 

thread, whipstitch the book together along the left-hand edge, like a book. 

Don't try to stitch through the paper - just stitch through the back cover, 

through the batting, and through the front cover.

Tie your ribbons and you're finished! It actually looks 

very much like my sketch, so I'm happy!

Woohoo! All done! Pin in some swatches and get sketching!

Happy stitching!

Kelly

Habitat Fabric Challenge!

My local branch of the Modern Quilt Guild has undertaken a challenge! We each received six fat eighths of Jay McCarroll's line of Habitat fabric for FreeSpirit. I have been completely in love with Jay McCarroll since Season 1 of Project Runway. I was obsessed with his final runway show, specifically due to his awesome use of really saturated colors (mustard, teal, plum), and the quilted details he incorporated into his line. When he started designing fabric, it seemed like a really natural move. So, suffice it to say, I'm super-psyched about this challenge!

That said, I NEED YOUR HELP!

These are the fabrics I received for the challenge.

I really love that orange and blue leaf print on the far end.

But I just can't decide what to make! I've decided to make a pillow for my apartment, but I can't decide which of the below designs to make.

A sketch for a Clamshell Pile pillow...

A sketch for a ruffled pillow (amazingly detailed, right?! - I am not a sketcher...)

And, my favorite, the zigzag design!

Let me know which one you think I should do, and I'll post a photo tutorial so you can make your own . . . . as soon as I figure out how to do it!

Happy stitching!

Kelly